3M RelyX U200 Refill Resin Luting Cement

RelyXTM U200 – the latest generation of the world ?s most clinically proven self-adhesive resin cement – is available in the ClickerTM Dispenser and in an easy-to-use automix syringe.

Comfortable and easy delivery
Simple and time-saving one-step solution
High-performing self-adhesive resin cement

Indicated for the permanent cementation of:

All-ceramic, composite, or metal inlays, onlays, crowns and bridges
Posts and screws
2- or 3-unit Maryland bridges
3-unit inlay/onlay bridges
All-ceramic, composite, or metal restorations to implant abutments

CEMENTATION-

step1- clean the tooth surface using polishing brush, water and air.

Note- do not use hydrogen peroxide as it may irritate the tissue.

step2- dispense a little quantity of cement onto the mixing pad. If its automix, you just need to push the plunger. If its the clicker variant, push down the white part of the product and push the plunger. Clean the opening after use.

step3- mix the dispenced cement using the spatula for 20 seconds.

step4- light cure for 1-2 sec and remove the excess cement using the blade or explorer. Setting time is 6 mins including the working time or light cure per surface for 20sec.

step5- finish and polish

COMPOSITION

BASE PASTE CATALYST PASTE
Methacrylate monomers containing phosphoric acid groups methacrylate monomers
Methacrylate monomers
alkaline basic fillers
silanated fillers silanated fillers
initiator components initiator components
stabilizers stabilizers
rheological additives rheological additives
pigments
Mixing time – 20 sec

Setting time – 6 min/ light cure each surface of tooth for 20 sec