Voco Ionofil Liquid Refill Restorative GIC

Mixing powder/liquid:

Shake powder well before use! Mix one level measuring scoop of powder with one drop of liquid. This corresponds to a mixing ratio of 4.0 parts powder to 1 part liquid by weight. Hold dropping bottle in vertical position and place 1 drop of liquid onto a dry glass or plastic plate. Hold bottle high enough so that a single drop can fall down freely. Only use drops without enclosed air bubbles! Mix the powder into the liquid in two equal portions using a clean metal spatula, or preferably with a clean plastic spatula. Only mix in the second portion when the first portion has been mixed in homogenously. The mixed cement has a firm, packable consistency. Avoid any contact with humidity! Never add new liquid during mixing! Mixing time working time setting time 50 – 60 s 2 – 3 min 4 – 5 min The mixing time takes approx. 50 – 60 s and should not exceed 1 min.

Application:

After application into the cavity VOCO lonofil Molar will set within approx. 2 – 3 min. During the placing of a filling the working area must be kept dry. The use of a rubber dam is recommended. Linings or build-up fillings can be carefully finished after setting (approx. 4 – 6 min after application). Glass ionomer cements are susceptible to humidity (breath, saliva) or, respectively, dehydration during the setting time, especially directly after application. If possible, cover immediately with a strip or matrix or apply a protective varnish. Finishing and polishing (flexible polishing discs) of the fillings should follow 7 min after application at the earliest. Afterwards, cover again with varnish. The best finishing results will be achieved approx. 24 h after the filling has been inserted.